Steel cutting machine periodic inspection requirements

    Long-term use of steel cutting machine can not always avoid the inevitable failures and damage to machinery and equipment, these can not be avoided. So for the life of steel cutting machine equipment, we can periodically to check on the steel cutting machine equipment. So, for steel cutting machine periodic inspection requirements, what does?

Reinforced inspection requirements for cutting machine, we need to be very careful. After running steel cutting machine , we can see whether the smooth functioning transmission mechanism should be, there should be no abnormal sound, crankshaft, connecting rod should not have cracks, distortion. In addition, we pay attention to see gear tooth surface to see if there are cracks, pitting and deformed happen if there is to be replaced immediately repair. See if there are scratches sliding bearings ablation, radial wear should not exceed 0.5mm.
Props for steel cutting machine installation, we have to see if the installed firmly without loosening, cutter blade can not have defects, cracks. However, the occurrence of the above phenomenon, we need to fix timely replacement, steel cutting machine so as not to cause more damage.

   

Reinforced cut operating rules

 hand-operated rebar cutting apparatus including first and second discs carried by a shaft mounted on a frame. The discs are pivotable relative to each other and each includes grooves which can be aligned for receipt of a bar to be cut. The first discs is pivotal on a shaft carried by a frame and moves incrementally through a predetermined arc such that the grooves become substantially axially offset from each other. The appartus is attached to a manually operable bender and straightener having a linearly reciprocable slide mounted within a guideway.

 As the slide is reciprocated, the first and second discs of the apparatus are pivoted relative to each other. The apparatus includes a ratchet mechanism for allowing incremental pivoting of the discs relative to each other through the predetermined arc, while allowing reciprocable movement of the slide to its initial position without returning the first and second discs to the position in which the grooves are aligned. The apparatus also includes return means for pivotally returning the first discs in a second direction through the entire predetermined arc during a single return stroke of the slide. When the grooves are substantially axially offset from each other, a bar placed in the aligned groove is thereby cut.

Rod Cutting Machines，Steel cutting machine，rebar cutting machine，Cutting Machine，Rebar Cutter: Introduction Rod Cutting Machines

Rod Cutting Machines，Steel cutting machine，rebar cutting machine，Cutting Machine，Rebar Cutter: Introduction Rod Cutting Machines: Rod Cutting Machines  is an advanced programmable controller, founded by high-quality electrical components from the cartridge sealing eleme...

Introduction Rod Cutting Machines

Rod Cutting Machines is an advanced programmable controller, founded by high-quality electrical components from the cartridge sealing element, so that the machine has a certain degree of job stability. Friction clutches and brakes are using compressed air drive, compressed air valve is electrically controlled. When overload, overload protection device can automatically cut off the power. Suitable for all kinds of material bar, angle steel, square steel, copper, aluminum shear. Shearing machine with high efficiency, small size, low noise, etc., it is a high-precision metal processing industries indispensable bar shearing equipment. But the lack of ability guillotine shear,Rod Cutting Machines production line equipment, large varieties of production, cutting force can not meet the conditions, due to the lifting of the space is not high reason chose 2.5MN shears. But the shortcomings is the lack of capacity, output acceleration but does not follow up on. In order not to replace shears, cut the elbow to eliminate quality defects, and the use of oblique shear principle, changing the shear mode. The theoretical Rod Cutting Machines oblique cut not only improves the quality of cut and greatly reduce the shear force, improve the insufficient capacity.