图片
2015年11月6日星期五
Rod Cutting Machines，Steel cutting machine，rebar cutting machine，Cutting Machine，Rebar Cutter: Rod cutting machine Highlights
Rod Cutting Machines，Steel cutting machine，rebar cutting machine，Cutting Machine，Rebar Cutter: Rod cutting machine Highlights: (1) Before using Rod cutting machine , to check the blade is firmly installed, the gap is appropriate, transmission system, the relative m...
2015年11月5日星期四
Rod cutting machine Highlights
(1) Before using Rod cutting machine , to check the blade is firmly installed, the gap is appropriate, transmission system, the relative moving part. Points lubrication is good, the last load test run, after confirmation before the official start of operations.
(2) the level of the fixed and movable blade gap should be maintained 0.5 ~ 1.0 mm, if the level of the gap is too large reinforced ends of the cut prone horseshoe. The amount of overlap of the two blades to be determined in accordance with the cut rebar diameter. Usually when cutting diameter less than 20 mm, blade vertical clearance is 1 ~ 2 mm, cut off 20 mm diameter greater than or equal to about 5mm. Increase or decrease the fixed blade clearance adjustable pad behind the blade.
(3) When cutting steel, the operator should hand grip bars, and other activities when the return blade into steel, reinforced to prevent the end of the swing or pop wounding.
(4) lead to be cut to the cut steel vertical and flat, the length of use pliers material into short steel blade when cutting 300mm or less, are not allowed direct hand feeding.
(5) exceeds a predetermined cutter diameter steel or chemical components in the steel over steel, steel and other burning red are not allowed off the plane.
(6) Rod cutting machine during operation, do not touch the cleaning blade above the dust accumulation, debris and found the sound is not working properly, the blade poor adhesion, etc., should immediately stop inspection, repair, until after commissioning, They are allowed to continue to use.
(7) Before using the hydraulic Rod cutting machine , to check the oil level and the motor rotation direction. Methods: Pine oil valve open, no-load operation 2min, exclude cylinder air, then tighten.
(8)Rod cutting machine handheld hydraulic when in use, hands should be steady cutting machine, and wear insulated gloves.
2015年5月25日星期一
Rod Cutting Machines，Steel cutting machine，rebar cutting machine，Cutting Machine，Rebar Cutter
GQ50 Rebar Cutter
Introduction:
Reinforcing steel bar cutting machine cuts rebar by converting electric power into kinetic energy through motor. It is durable and of high precision. As a professional rebar cutter supplier, our products can be applied in construction site, steel bar processing factories, road and bridges, etc.
Features:
1.It is with compact structure and good quality.
2. t is easy to move with rolling type truckles.
3.It has outstanding lubricating property, and can be used for over three months continually when getting enough fuel (8-12kg).
4.Reinforcing steel bar cutting machine for diameter 50mm is with low energy consumption as it adopts antifriction bearings with less resistance.
5.It has long working life as it uses high rigidity tool apron and connecting rod.
Introduction:
Reinforcing steel bar cutting machine cuts rebar by converting electric power into kinetic energy through motor. It is durable and of high precision. As a professional rebar cutter supplier, our products can be applied in construction site, steel bar processing factories, road and bridges, etc.
Features:
1.It is with compact structure and good quality.
2. t is easy to move with rolling type truckles.
3.It has outstanding lubricating property, and can be used for over three months continually when getting enough fuel (8-12kg).
4.Reinforcing steel bar cutting machine for diameter 50mm is with low energy consumption as it adopts antifriction bearings with less resistance.
5.It has long working life as it uses high rigidity tool apron and connecting rod.
2015年5月24日星期日
Rod Cutting Machines，Steel cutting machine，rebar cutting machine，Cutting Machine，Rebar Cutter
Cutting Machine,rebar cutting machine,Steel cutting machine
Introduction:
Steel rod cutting machine can cut round steel 32 times per minute and can be used in construction sites, rebar processing factories, roads and bridges building sites, etc. As a recognized rod cutter supplier, our products are with high cutting speed and long working life.
Features:
1. It has low energy consumption and high performance.
2. Steel rod cutting machine for dia.40mm steel rod is easy to move with rolling type truckles.
3. It has good lubricating property, and can be used for over three months continually when getting enough fuel (8-12kg).
4. It is with low energy consumption as it adopts antifriction bearings with less resistance.
5. Our rod cutters have long working life as it uses high rigidity tool apron and connecting rod.
6. All core components are self produced, which can ensure quality.
7. Gear adopts 500 nodular cast iron, which ensures it can work under heavy load.
Introduction:
Steel rod cutting machine can cut round steel 32 times per minute and can be used in construction sites, rebar processing factories, roads and bridges building sites, etc. As a recognized rod cutter supplier, our products are with high cutting speed and long working life.
Features:
1. It has low energy consumption and high performance.
2. Steel rod cutting machine for dia.40mm steel rod is easy to move with rolling type truckles.
3. It has good lubricating property, and can be used for over three months continually when getting enough fuel (8-12kg).
4. It is with low energy consumption as it adopts antifriction bearings with less resistance.
5. Our rod cutters have long working life as it uses high rigidity tool apron and connecting rod.
6. All core components are self produced, which can ensure quality.
7. Gear adopts 500 nodular cast iron, which ensures it can work under heavy load.
Why Choose Rod Cutting Machine from FengYiDa Machinery?
订阅：
博文 (Atom)