Improved cutting machine recommendations

    Cutting machine is generally used to access cut under construction rebar and round material. At present, China's most cutting machine relatively high cost, and the difficulty of processing is also larger, so in order to reduce costs, reduce processing time, put forward the following suggestions for improvement:
    1, frame by a steel plate welded structure to casting. When the original cutter during cutting, the rack will be rocking phenomenon, beam weld cracking, deformation wheelbase, which may be due to the quality of steel, welding technology and heat caused by the insufficient level of maturity, it is recommended to change the rack the overall structure is more suitable for the casting.
    2, the cast member to cast iron. The main parts of cutting machine are fixed cutter knife, Dodo clip, gear, etc., are steel castings. For many small and medium sized manufacturers, mostly not cast the device, only through contract manufacturing, which greatly extend the production cycle, increase production costs, but tests proved by the above castings can be used instead of cast iron , it is recommended that instead of cast iron.
    3, the structure can be simplified. Structure should ensure the realization of certain functions in the next, and strive to be simplified.
    4, parts machining accuracy level can be appropriately reduced. The accuracy of the product is not in fact the higher the better, but there should be a proper request, whether Cutting machine will cause difficulties in processing and assembly, so that the cost increase.